|
TASCAM CD-RW901 MK2 CD REWRITABLE Recorder W/BALANCED OUTPUT (CD-RW900 MK2/CD-RW901MK2)
-------------------------------------------------------------------------------------------------------
CD-RW901MKII OVERVIEW
A Professional CD Recorder/Player with Proprietary TEAC Tray-Loading Transport Doubles as a Professional CD Player with Advanced Playback Functions
The CD-RW900MKII and CD-RW901MKII are professional CD recorders that replace the best-selling CD-RW900SL and CD-RW901SL. A new TEAC tray-loading transport ensures years of reliable operation in the most demanding installations. The new transport also allows gapless recording when writing track markers, something not possible using off-the-shelf PC drives. Various recording features like automatic track creation help the operator create polished recordings without constant supervision. An AKM AK4528VM is used for AD/DA conversion for clean, clear sound quality with a frequency response of 20Hz to 20kHz +/-0.8dB. With the CD-RW901MKII, balanced analog input/output jacks and external control terminals are included. Additionally, long-run continuous recording (and overlap recording) is possible by connecting multiple CD-RW901MKIIs with an accessory cable. An ISRC/RID code can be displayed to check the recording in a mastering studio.Whether used for PA/Sound Reinforcement playback, studio, mastering, or broadcast, the CD-RW900MKII and 901MKII are TASCAM's latest generation of reliable CD recording and playback.
Lineup
CD-RW900MKII |
CD-RW901MKII |
Features
CD Recorders that meets the demands of professionals |
To TOP | - CD Recorders That Meet The Demands of Professionals
-
|
The high-performance AKM codec captures audio with a wide dynamic range for better-sounding CD recording | - Independent Input Trim Controls for Left and Right and Digital Input Trim
-
|
Both the left and right analog inputs have their own analog input gain controls. In addition, the digital input can be controlled for optimal recording levels from a digital source. | - A selection of Track Division Functions
- The CD-RW900MKII and 901MKII have a variety of track division functions to make recording simpler. Additionally, a rec-mute function can insert silence between tracks.
Automatic Track Division
A track marker can be created based on the input level, adding a new track when the input falls below a specified level (from -24 to -72dB). Time Track Division
Time-based track creation can be set every 1-10 minutes. This method is preferred in some applications like conference recording, when there is no gap between segments like there is when recording music. Manual Track Division
A new track can be written manually by pressing the Record key while the unit is in record mode.
- All new TEAC-designed tray-loading transport with gapless continuous recording
- The new TEAC CD-W5600S transport was designed for audio use – not a re-packaged computer drive. The tray-loading design provides a stable platter to minimize errors while writing the disc. Improved firmware allows the transport to write track markers without a gap, for seamless continuous live recordings.
Comprehensive Playback Features Make It the Ideal Professional CD Player |
To TOP | - The Features Required in a Professional CD Player
-
|
Even if you don't need to record every day, the CD-RW900MKII and 901MKII make excellent CD players. Functions including auto-cue, auto-ready, pitch control, power-on playback, and fade-in/fade-out playback are provided. It is also possible to control the transport via a P/S2 keyboard (sold separately).
| - Reliable TEAC CD Transport
-
|
The new TEAC transport has been tuned up explicitly for these models. The drive can accept any legal CD type, including MP3 CDs. Like all TASCAM players, reliability is a principal design feature. | - Shockproof Memory Prevents Skipping Due To Vibration
- A RAM buffer stores audio data in memory to ensure smooth playback, even if shock or vibration lasts for up to four seconds.
- A Selection of Inputs and Outputs To Fit Any System Design
-
|
Unbalanced analog and S/PDIF coaxial and optical connections are provided for connection flexibility. |
The CD-RW901MKII: For More Demanding Installations |
To TOP | - ISRC/RID Display Function for Checking after Mastering
- The ISRC (International Standard recording Code) written during mastering can be displayed. The CD-RW901mkII can check the data on a master disk after mastering. It can also display the RID (Recorder Identification Code).
-
- External Control via RS-232C & Parallel Control
-
|
The RS-232C serial and 15-pin parallel terminals make it possible control the recorders from various master controllers. It can be used with a fader-start signal in a broadcasting station, or with a centralized control terminal in a public facility. | - Analog/Digital XLR Inputs and Outputs Connect to Professional Equipment
- Balanced analog XLR inputs and outputs are provided for use with pro equipment or long signal runs. Balanced AES/EBU is also included for use with digital mixers, processors, and processing.
-
- Overlap Recording Function for Extended Recordings
- Continuous recording is supported when using two or more CD-RW901MKIIs connected through their parallel ports. An optional cable is available for two or three-machine recording setups. A selectable overlap of 30, 60, or 90 seconds can be switched on for the next recorder to find a better edit point.
- Adopts AK4528VM audio codec made by Asahi Kasei Microdevices which has 24-bits processing
- Independent input level controls provides serious level control
- Supported media: CD-R, CD-R-DA, CD-RW, CD-RW-DA
- High speed CD-RW Supports
- CD drive supports playback of CD-DA and Data-CD
- High reliability proprietary TEAC tray drive
- OPC (optimum power control) function: Adjusting the laser power for each disc type
- Fade-in/Fade-out recording function (1 to 30 seconds, 1 seconds increments)
- Sync recording function: Automatically start/stop recording at a preset level (-24dB to -72dB, 6dB increments)
- Digital volume for adjusting recording level seriously (-¡Ä¡¢-54.0dB to 18.0dB)
- Automatic track division: Automatically insert a track division at a preset condition
- Manual track division: Insert a track division by manual operation
- Time track division: Automatically insert a track division per preset interval (1 to 10 minutes, 1 minutes increments)
- Rec-mute function: Recording four seconds of silence on the disc
- Selectable maximum recording track numbers (automatically stop at preset number)
- Erase function: Erase selected track or disc (for CD-RW)
- Four playback modes (continuous, single, program, random)
- Repeat playback function (continuous, single, program, random, A-B)
- Fade-in/Fade-out playback function (OFF, 1 to 30 seconds, 1 seconds increments)
- Auto-cue function: Automatically pause by detection of a sound of start point in a track
- Auto-ready function: Automatically pause at head of next track after playback previous track
- Pitch control playback function: Pitch and speed can be varied (+/-16%, 0.1 to 1.0% increments, for CD-DA)
- Key control playback function: (b1 to b6, #1 to #6, half-note increments, for CD-DA)
- When using key control function with pitch control function, these function provides speed changing without changing pitch
- Timer playback function (external timer sold separately): Automatically begin playback when turned on
- Unfinalize function (for CD-RW): Erase TOC information of finalized CD-RW
- Time display switching (elapsed track/disc time, remaining track/disc time)
- CD-text editing supports
- PS/2 keyboard (sold separately) connection for remote control or entering a title
- SRC (sampling rate converter): Automatically convert the incoming frequency to 44.1kHz (for 32 to 48kHz)
- RCA analog unbalanced inputs/outputs
- COAXIAL digital input/output (IEC60958-3:S/P DIF)
- OPTICAL digital input/output (IEC60958-3:S/P DIF)
- Wireless remote controller with 10-key included (for CD-RW900MKII)
- Headphone output (20mW/ch)
- 3-polar AC sockets with the detachable AC cable
- 2U EIA rackmountable
- RoHS certified
Dedicated Features for CD-RW901MKII
- Sync trim function (+/-125 frame, +/-1.67 seconds)
- Automatic track division with trim function (+/-125 frame, +/-1.67 seconds)
- Selectable COPY ID£¨free/1 generation/prohibit/SCMS£©
- Call function: Return to a point at which playback last started from ready mode
- EOM (end of message) function: EOM indicator will light-up before the end of track or disc (1 to 99 seconds)
- ISRC/RID code display function
- Time skip function: While in playback or ready, moves the playback point to forwards or backwards (1 seconds increments)
- Index search function: Search indexes within a track that were assigned during recording
- Overlap recording function: Using two-units CD-RW901MKII to make continuous recording
- Fader start/stop control via parallel control connector
- D-sub 9pin RS-232C serial control connector
- D-sub 15pin parallel control connector
- XLR analog balanced inputs/outputs
- XLR digital input/output (IEC60958-4:AES/EBU)
- Wired remote controller included
Differences from CD-RW900SL/CD-RW901SL
- Time track division added to CD-RW900MKII
- Industrial design
- Tray loading type CD drive
-------------------------------------------------------------------------------------------------------
CD-RW901MKII IMAGES
-------------------------------------------------------------------------------------------------------
CD-RW901MKII SPECIFICATIONS
|
CD-RW900MKII |
CD-RW901MKII |
Supported disc types |
CD-R, CD-R-DA, CD-RW, CD-RW-DA(High Speed CD-RW is supported) |
Playback disc formats |
CD-DA, CD-ROM ISO9660 LEVEL 1/2 Joilet format, multisession discs and CD-text |
Playback file formats |
|
CD-DA |
44.1kHz, 16bit, stereo |
MP3 |
44.1kHz, 64 to 320kbps, VBR |
Recording file formats |
|
CD-DA |
44.1kHz, 16bit, stereo |
ANALOG IN |
|
Unbalanced |
|
Connector |
RCA pin jack |
Input impedance |
22k¥Ø +/-10% (unbalanced) |
Reference input level |
-10dBV (Full scale -16dB) |
Minimum input level |
-19dBV (adjustable level at Full Scale -16dB) |
Balanced |
|
Connector |
- |
XLR-3-31(1:GND, 2:HOT, 3:COLD) |
Input impedance |
- |
14k¥Ø +/-5% (balanced) |
Reference input level |
- |
-4dBu (Full scale -16dB) |
Minimum input level |
- |
-5dBu (adjustable level at Full Scale -16dB) |
ANALOG OUT |
|
Unbalanced |
|
Connector |
RCA pin jack |
Output impedance |
200¥Ø |
Reference output level |
-10dBV +/-2dB (Full scale -16dB) |
Maximum output level |
+6dBV +/-2dB |
Balanced |
|
Connector |
- |
XLR-3-32(1:GND, 2:HOT, 3:COLD) |
Output impedance |
- |
75¥Ø +/-5% (balanced) |
Reference output level |
- |
+4dBu (Full scale -16dB) |
Maximum output level |
- |
+20dBu |
DIGITAL IN |
|
COAXIAL |
|
Connector |
RCA pin jack |
Format |
IEC60958-3(S/P DIF) |
OPTICAL |
|
Connector |
TOS LINK |
Format |
IEC60958-3(S/P DIF) |
AES/EBU |
|
Connector |
- |
XLR-3-31 |
Format |
- |
IEC60958-4(AES/EBU) |
DIGITAL OUT |
|
COAXIAL |
|
Connector |
RCA pin jack |
Format |
IEC60958-3(S/P DIF) |
OPTICAL |
|
Connector |
TOS LINK |
Format |
IEC60958-3(S/P DIF) |
AES/EBU |
|
Connector |
- |
XLR-3-32 |
Format |
- |
IEC60958-4(AES/EBU) |
PHONES |
|
Connector |
6.3mm(1/4") stereo phone jack |
Output power |
20mW + 20mW or more(32¥Ø loaded) |
KEYBOARD |
|
Connector |
Mini DIN 6pin |
CONTROL I/O |
|
RS-232C |
|
Connector |
- |
D-sub 9pin |
PARALLEL |
|
Connector |
- |
D-sub 15pin |
REMOTE |
|
|
Connector |
- |
For RC-RW901 |
Power |
North America: 120VAC, 60Hz Europe: 230VAC, 50Hz Australia: 240VAC, 50Hz |
Power consumption |
North America:16W Europe, Australia: 18W |
North America:17W Europe, Australia: 19W |
Dimensions |
482.6(W)¡¿94(H)¡¿309(D)mm 19.0(W)¡¿3.7(H)¡¿12.2(D)inch |
Weight |
4.3kg/9.5lb |
4.5kg/9.9lb |
Audio performance |
Frequency response |
|
playback |
20Hz to 20kHz, +/-0.8dB |
recording |
20Hz to 20kHz, +/-1.0dB |
S/N ratio |
|
playback |
95dB |
recording |
90dB |
Dynamic range |
|
playback |
95dB |
recording |
90dB |
Distortion |
|
playback |
0.006% |
recording |
0.008% |
Channel separation |
|
playback |
90dB(1kHz) |
recording |
80dB(1kHz) |
Wow and flutter |
Immeasurable (0.001% or less) | -------------------------------------------------------------------------------------------------------
CD-RW901MKII DOWNLOADS
Documents
2014-06-04 00:00:00Specifications - 213.69 KBe_cd-rw901mkii_spec.pdf
2014-04-16 00:00:00CAD outline DXF - 1.03 MBcd-rw901mkii_outline.zip
Manuals
2014-06-04 00:00:00Manuals - 2.06 MBe_cd-rw901mkii_om_vb.pdf------------------------------------------------------------------------------------------------------- |
|